WENZHOU KMO FLUID EQUIEPMENT CO,.LTD

Showing 21 - 30 of 38, total 4 pages [First] [Previous] [Next] [Last]

stainless steel fluorine-lined ball valve
Specification: DN15-DN200mm
Detail: Product Introduction The KQ41F46 fluorine-lined ball valve uses fluorine plastic as the inner liner, with a new ball structure and an elastic lip seal seat structure, which can provide high sealing performance and ...

304 stainless steel forging steel floating ball valve
Specification: 1/2"-8" inches
Detail: Product Introduction KQ41N gas ball valve is a kind of valve used to cut off, distribute and change the direction of medium flow in the pipeline. It only needs to be operated with a rotation of 90 degrees and a small t...

ansi forging steel floating ball valve for water oil gas
Specification: 1/2"-8"inches
Detail: Product Introduction KQ41N gas ball valve is a kind of valve used to cut off, distribute and change the direction of medium flow in the pipeline. It only needs to be operated with a rotation of 90 degrees and a small t...

wcb v type ball valve for water oil gas
Specification: DN50-DN400mm
Detail: Product Introduction The KVQ347Y-16C V-type ball valve is a rotary regulating valve with a rotation angle of 90 degrees. It consists of pneumatic or electric actuator and V ball valve body assembly. The ball core is...

stainless steel thread screw ball valve
Specification: DN10-DN50mm
Detail: Product Introduction The KQ11F (2P) threaded ball valve is a valve that is 90 degrees perpendicular to the channel. The ball rotates around the center line of the valve body to achieve opening and closing. The ball v...

jis carbon steel y strainer for water oil
Specification: DN20-DN150mm
Detail: Product Introduction The KSRY14G JIS strainer is an indispensable device in the pipeline system. The structure and flange holes standard are according to JIS. It is usually installed at the inlet end of the equipment...

ansi y strainer for water oil
Specification: 1/2
Detail: Product Introduction The KSRY14G ANSI strainer is an indispensable device in the pipeline system. The structure and flange holes standard are according to ANSI. It is usually installed at the inlet end of the equipme...

automatic backwash strainer
Specification: DN40-DN500mm
Detail: Product Introduction KZPL-39DC4X is a straight-through strainer that can be cleaned automatically. Through the pressure difference before and after filtration, the strainer can filter, clean, and drain by relying on ...

stainless steel welding ball valve
Specification: Nominal Diameter: DN15-DN100mm
Detail: The KQ61F (3P) welded ball valve is a kind of ball valve that is 90 degrees perpendicular to the channel. The ball rotates around the center line of the valve body to open and close. The ball valve is mainly used in the pipeli...

din y strainer flange filter for water oil
Specification: Nominal Diameter: DN15-DN400mm
Detail: The KSRY(D)14G strainer is an indispensable device in the pipeline system. The flange hole size is according to DIN2527. It is usually installed at the inlet end of the equipment to filter particulate impurities in the medium ...


Showing 21 - 30 of 38, total 4 pages [First] [Previous] [Next] [Last]
1 2 3 4