|
|
Build Your Online Product Catalogs?
| Product Name: |
Automatic Backwash Strainer
|
| Supply Ability: |
|
| Related proudcts |
industrial strainer, |
| Specifications |
DN40-DN500mm |
| Price Term: |
FOB |
| Port of loading: |
Ningbo |
| Minimum Order |
5 |
| Unit Price: |
Negotiable |
|
Product Introduction
KZPL-39DC4X is a straight-through strainer that can be cleaned automatically. Through the pressure difference before and after filtration, the strainer can filter, clean, and drain by relying on automatic components and electric actuators.
Body Material: WCB(more ***ails please check the follow drawing)
Applicable medium: water, oil
Diameter: DN40-500mm
Nominal Pressure: 0.6~2.5***
Design temperature:-10oC~ +60oC
Connection type: flange
Filter meshes: 40 meshes or customer requirements
Design Standard: SH/T3411
Flange Standard: GB /JB / HG / DIN
Working Principle
When the strainer is working, the valve A is open. After the fluid passes through the filter screen, the fine particle impurities and suspended matter in the fluid are deposited near the sewage outlet using the principle of inertia.
When the filter is normally flushed, the valve A is open. When the fine particles and impurities in the filter screen reach a certain amount, the sewage valve B is opened, and the impurities sticking to the collection section of the strainer are washed and discharged due to the action of the water flow until the outflow of liquid is clear. Then close the drain valve B to enter the normal working state.
When it is back-washing, the water flow steering valve A is closed and the blow-down valve B is opened. At this time, the water flow is through the mesh of the inlet section of the filter mesh cylinder to enter the outer layer of the filter cylinder and the shell inter-layer, and reversely flush and stick from the outer side of the mesh cylinder to clean the filter screen. Since the water flow steering valve A is closed, the water flow rate increases and the backwash effect is better.
Through the pressure difference before and after filtration, the strainer can filter, clean, and drain by relying on automatic components and electric actuators.
In addition to control the pressure difference, KMO can also set the cleaning cycle according to user needs, so as to realiz |
| Company: |
WENZHOU KMO FLUID EQUIEPMENT CO,.LTD
|
| Contact: |
Ms. Miranda Chen |
| Address: |
Wenzhou Yongjia Dong'ou Fort Street, Industrial Zone |
| Postcode: |
315200 |
| Tel: |
8618057776809 |
| Fax: |
|
| E-mail: |
|
|
|
|
Home
